APPLICATIONS
The diaphragm valves, shown in this chapter, are classified
“Pressure accessories” in the sense of the Pressure
Equipment Directive 97/23/EC, Article 1, Section 2.1.4 and
are subject of Article 3, Section 1.3 of the same Directive.
They are designed for installation on commercial refrigerating
systems and on civil and industrial conditioning plants,
which use the following refrigerant fluids: R22, R134a,
R404A, R407C, R410A; R507 proper to the Group II (as
defined in Article 9, Section 2.2 of Directive 97/23/EC
and referred to in Directive 67/548/EEC). For specific
applications with refrigerant fluids not listed above, always
proper to the Group II, please contact Castel Technical
Department.
Model | Part Number |
---|---|
Hand Valve 1/4″ Flare | 6210/2 |
Hand Valve 3/8″ Flare | 6210/3 |
Hand Valve 1/2″ Flare | 6210/4 |
Hand Valve 5/8″ Flare | 6210/5 |
Hand Valve 3/4″ Flare | 6210/6 |
Related Products
-
Danfoss Maneurop KVC Hot Gas Bypass Regulators
Rp0.00KVC hot gas bypass regulators are used to adapt compressor capacity to actual evaporator load by supplying a replacement capacity…
-
Castel Solenoid Expansion Valve
Rp0.00Solenoid valves are designed for installation on commercial refrigeration systems and commercial and industrial air conditioning systems employing HCFC and…
-
Danfoss Maneurop KVP Evaporator Pressure Regulator
Rp0.00The KVP is mounted in the suction line after the evaporator and is used to: 1.Maintain a constant evaporating pressure…
-
Danfoss Maneurop TE Series Expansion Valve
Rp0.00Efficient injection control The Danfoss T2/TE2 thermostatic expansion valves provide efficient control of the injection of refrigerant liquid into evaporators…